iPad Won’t Turn On or is Frozen? Ways to Fix an iPad Pro, Air or Mini

You risk losing a lot of stuff whenever your iPad without a home button won’t turn on or is frozen, so you should act quickly. Let’s look into the problem step by step and figure out what’s wrong, before fixing your iPad Pro, Air or Mini that won’t restart.

First, we’ll go over the main reasons why iPads stop working and how to check them. We will then see how you can fix your iPad on your own i.e. using a different charger and looking at the charging port for any damage or dirt.

Our guide was created by tech experts to help you fix your iPad without paying. If your iPad still doesn’t turn on, we’ll tell you when it’s time to get help from a professional repair service or Apple support. But until then, here are all the ways you can try to fix an iPad Pro, Air or Mini that won’t turn on or restart.

Key Takeaways

Sometimes, it’s possible that your iPad is stuck, in which case a force restart may help. iPads do not turn on which is worrying and the reasons behind it include (but not limited to):

• A broken charger or charging cable.
• An old or drained battery.
• iPads usually turn off or shut down once they get too hot so as to protect their components.
• Water damage since iPads aren’t waterproof.

To fix battery problems:

• Try using a different charger or cable.
• Plug your charger into a different wall socket.
• Test the charger and cable with another Apple device to see if they work.
• If everything seems fine, leave your iPad charging for about an hour before trying to use it again.

Solutions for iPad Pro, Air, and Mini Not Responding to Charging

Let’s discuss the reasons why your iPad Pro, Air or Mini could be having trouble turning on.

• The iPad might not turn on if its battery is dead or at 0%.
• Issues with the charging cable or adapter could prevent it from powering up.
• A software malfunction could be causing the iPad to be unresponsive or isn’t working.
• Faulty components, such as a broken power button or battery, may also be to blame if iPad doesn’t turn on.
• If the iPad has gotten wet, it could have shut off as a result.

Check Out: how to protect your privacy while playing mobile games?

Advice for Fixing Your iPad Pro That Won’t Turn On Even When Plugged In

Here’s how to solve the problem if your iPad Pro won’t turn on:

1. Ensure your iPad has enough battery by charging it completely.
2. Use different power outlets, charging cables, and adapters to charge your iPad.
3. Force restart your iPad by pressing and holding the top button along with the Volume button simultaneously until the Apple logo appears.
4. Perform a hard reset. On iPads without a home button, press and quickly release the volume button the Volume Up, then Volume Down, then press and hold the power and top button at the same time until you see the Apple logo.
5. If your iPad gets wet, place it in uncooked rice or silica gel for a few hours before turning it on.
6. If none of these steps work, there might be a hardware issue causing iPad Pro not to turn on.
7. Contact Apple support, check out their online support articles, or visit a local Apple Store or Genius Bar to seek assistance from professionals. See the Apple support article for more information.

Preventing this Problem in the Future:

1. Ensure your device has the latest iPadOS software and you update your iPad regularly to prevent bugs.
2. Maintain the optimal battery level i.e. between 20% and 80%.
3. Use a case and screen protector to prevent damage.
4. Keep the iPad away from extremely hot or cold environments.
5. Regularly clean the ports and screen.

Is your iPad Stuck on the Apple Logo and Won’t Turn On?

If your iPad won’t turn on when it’s plugged in, a few things might be the cause. Let’s see why this happens and what you can do.

• Your iPad might have no charge left in its dead battery. Wait a while to see if it starts charging.
• The charger or cable you’re using could be damaged.
• Your iPad might have a software or hardware problem.

Read: How To Change “Hey Siri” to “Siri”?

How to Fix Your iPad if it’s Stuck on the Apple Logo and Won’t Turn On?

Follow these steps to fix your iPad if it gets stuck on the Apple logo and won’t turn on:

• Use an Apple-approved charger and keep it plugged in for 15 to 30 minutes. If the battery is dead, it needs time and power to start up.
• Check your charging cable or adapter for any obvious damage.
• Perform a force restart. Press and quickly release the Volume Up button, then Volume Down button, then press and hold the top button until the device begins to restart.
• Try putting your iPad into recovery mode. If your iPad will not turn on, you may need to put it into recovery mode. by connecting it to a computer and opening iTunes or Finder. Press and hold the Power and Home buttons (or Volume Down button on iPads without Home button) until you see the Recovery Mode screen.
• If none of these fixes work, contact Apple support or visit an Apple store.

Ways to prevent it from happening again:

• Take care of your iPad.
• Charge it when the battery is almost empty (less than 20%) or after using it for a long time.
• Keep your iPad away from water damage.
• Use genuine charging accessories and regularly do software updates for the latest iPadOS.

Guide to Fixing an iPad Screen that is Black and Unresponsive

If your iPad’s screen is black and not responding, it might cause concern. But don’t panic just yet. There could be a few reasons for this issue, and there are troubleshooting steps to solve it.

Why Is My iPad Screen Black and Not Turning On?

Here’s why your iPad screen is black and nothing shows:

• The battery might be completely drained or dead.
• It could be a software issue, possibly with the latest iPadOS.
• Or there might be a hardware problem.

Solving a Black Screen on iPad That Won’t Turn On

Here’s how you can solve the issue if your iPad screen is black and won’t turn on:

• Begin with force restarting your iPad by pressing and holding the top button and one of the Volume buttons together until you see the Apple logo.
• If that doesn’t work, try forcing a restart again. Press and quickly release Volume Up, then Volume Down, then press and hold the Power button until the Apple logo appears. This is a common method to force restart iPad.
• If your iPad has a Home button, press and hold both the Home and Power buttons together for at least 10 seconds until the Apple logo appears.
• Try charging the iPad for 30 minutes. If the screen stays black, it’s possible the battery is severely drained. Let it charge for a couple hours and see if it turns back on.
• Check your iPad’s brightness settings, it may be on the lowest level making the screen appear black.
• Try connecting your iPad to a computer with iTunes to see if you can put it in recovery mode. If your iPad shut down and will not turn back on, you might need to force restart iPad to resolve the issue.. If you see the Recovery Mode screen, try restoring the iPad.
• A hardware problem could be underlying if none of these methods work. So you may need assistance from a professional at the Genius Bar or an Apple Store.

How to Prevent the iPad Screen from Going Black Again?

Keep your iPad software up to date to avoid sudden crashes later on. Check for iPadOS updates and install any available. Be careful when handling your iPad to prevent any external damage, which could be very harmful.

Force Restarting Your iPad

• To force restart any recent iPad model without a Home button, simultaneously press and quickly release the Volume Up button, Volume Down button, and hold the Power/Top button until you see the Apple logo.
• For older iPads with a Home button, press and hold the Power and Home buttons together for at least 10 seconds until the Apple logo appears.

What to Do When Your iPad Isn’t Working and Won’t Turn On?

If your iPad doesn’t turn on after trying the troubleshooting steps above, here’s what else you can try: force restart iPad by following the instructions.

• Update your iPad using a computer. Connect the iPad to your Mac or PC, open iTunes or Finder, and see if it recognizes the iPad. If so, try updating the software.
• Use recovery mode. Connect the iPad to the computer while pressing and holding the Power+Home buttons (or Power+Volume Down on newer models). Keep holding until you see the Recovery Mode screen, then try restoring the iPad.
• As a last resort, put the iPad in DFU mode. This is a special diagnostics mode that can help if a restore doesn’t fix the issue.
• Visit an Apple Store or authorized service provider for hardware diagnosis and repair.

Where Can I Get Professional Help if My iPad Won’t Turn On?

If your iPad still won’t turn on after trying the troubleshooting steps above, it’s time to contact the experts:

• Go to the Apple Support website to see helpful articles, contact options, and repair information.
• Make a Genius Bar reservation at your local Apple Store to speak with a technician in person.
• Contact Apple Support by phone, chat, or email for personalized assistance.
• If you have AppleCare+ coverage, visit an Apple Authorized Service Provider or Apple Store for repairs or replacement.
• For more information on the cost of repairing an iPad, check out our article.

In Conclusion

It’s frustrating if your iPad Pro suddenly turns off and won’t turn back on. But if you know how to troubleshoot issues using the steps above, you can determine the cause and fix it to get your iPad working again.

Also, remember to take precautions to keep your iPad well looked after and updated to prevent such problems from happening again in the future.