You risk losing a lot of stuff whenever your iPad won’t start, so you should act quickly. Let’s look into the problem step by step and figure out what’s wrong, before fixing your iPad. First, we’ll go over the main reasons why iPads stop working and how to check them.
We will then see how you can fix your iPad on your own i.e. using a different charger and looking at the charging port for any damage or dirt.
Our guide was created by tech experts to help you fix your iPad without paying. If your iPad still doesn’t work, we’ll tell you when it’s time to get help from a professional repair service. But until then, here are all the ways you can try to fix your iPad.
Key Takeaways
Sometimes, iPads do not turn on which is worrying and the reasons behind it include (but not limited to):
- A broken charger or charging cable.
- An old or drained battery.
- iPads usually turn off once they get too hot so as to protect their components.
- Water is damaged since iPads aren’t waterproof.
To fix battery problems:
- Try using a different charger or cable.
- Plug your charger into a different wall socket.
- Test the charger and cable with another Apple device to see if they work.
- If everything seems fine, leave your iPad charging for about an hour before trying to use it again.
Solutions for iPad (Pro, Air, and Mini) Not Responding to Charging
Let’s discuss the reasons why your iPad could be having trouble turning on.
- The iPad might not turn on if its battery is 0%.
- Issues with the charging cable or adapter could prevent it from powering up.
- A software malfunction could be causing the iPad to be unresponsive.
- Faulty components, such as a broken power button or battery, may also be to blame.
- If the iPad has gotten wet, it could have shut off as a result.
Advice for Fixing Your iPad (Pro, Air, and Mini) that Won’t Turn On Even When Plugged In
Here’s how to solve the problem if your iPad won’t turn on:
- Ensure your iPad has enough battery by charging it completely.
- Use different power outlets, charging cables, and adapters to charge your iPad.
- Press and hold the home and power and home buttons together until the Apple logo appears.
- If your iPad gets wet, place it in uncooked rice or silica gel for a few hours before turning it on.
- If none of these steps work, there might be a hardware issue with the iPad.
- Contact the Apple store or visit one nearby to seek assistance from professionals.
Preventing this Problem in the Future:
- Ensure your device has the latest software to prevent bugs.
- Maintain the optimal battery level i.e. between 20% and 80%.
- Use a case and screen protector to prevent damage.
- Keep the iPad away from extremely hot or cold environments.
- Regularly clean the ports and screen.
Is your iPad Frozen on the Apple Logo?
If your iPad won’t turn on when it’s plugged in, a few things might be the cause. Let’s see why this happens and what you can do.
- Your iPad might have no battery left. Wait a while to see if it starts charging.
- The charger or cable you’re using could be damaged.
- Your iPad might have a software problem.
How to Fix Your iPad if it’s Stuck on the Apple Logo?
Here’s what you can do to fix your iPad:
- Use an Apple-approved charger and keep it plugged in for 15 to 30 minutes. If the battery is empty, it needs time and power to start up.
- Check your charging cable or adapter for any obvious damage.
- Perform a hard reset.
- If none of these fixes work, contact Apple Support or visit an Apple store.
Ways to prevent it from happening again:
- Take care of your iPad.
- Charge it when the battery is almost empty (less than 20%) or after using it for a long time.
- Keep it away from water.
- Use genuine charging accessories and do system updates often.
Guide to Fixing an iPad Screen that is Black and Not Responding
If your iPad’s screen is black and not responding, it might cause concern. But don’t panic just yet. There could be a few reasons for this issue, and there are ways to solve it.
Why Is My iPad Screen Black and Not Turning On?
Here’s why your iPad screen is black and won’t turn on:
- The battery might be completely drained.
- It could be a software issue.
- Or there might be a hardware problem.
Solving a Black iPad Screen
Here’s how you can solve the issue if your iPad screen is black and won’t turn on:
- Begin with hard resetting your device. You can find the instructions below.
- If that doesn’t work, try charging it for 15 to 30 minutes.
- A hardware problem could be underlying if none of these methods work. So you may need assistance from a professional.
How to Prevent the iPad Screen from Going Black Again?
Keep your device software up to date to avoid sudden crashes later on.
Be careful when handling your iPad to prevent any external damage, which could be very harmful.
Resetting Your iPad
- To reset any Apple device, simultaneously press the Volume Up button, Volume Down button, and Power button until you see the Apple logo.
Where Can I Get Professional Help if My iPad Won’t Turn On?
For information on the cost of repairing an iPad, check out our article.
In Conclusion
It’s frustrating if your iPad suddenly turns off and won’t turn back on. But if you know how to troubleshoot issues, you can determine the cause and fix it to get your iPad working again. Also, remember to take precautions to prevent such issues in the future.
